products

DC traction electromagnet

MQZ1 DC traction electromagnet is mainly used in the control circuit of DC 220V, as the electromagnet coil for switching of motorized operating device of vacuum circuit breaker and switchgear incoming/outgoing cables.

item no.:
MQZ1

inquiry now

details

Characteristics MQZ1 DC traction electromagnet

* Easy to fix and connect to the load

* The risen temperature is stable so as to prolong lifetime and guarantee excellent performance

* Anti-friction ensures high efficiency and long lifetime

* Full resin encapsulation in high IP protection level

Coil Voltage		220VDC /110VDC
Rated Attraction		7N
Rated Travel		12mm
Operation Frequency (Power duration <1s)		180(times/H)
Limit of temperature rise		65(K)
Lifetime		>10000 times
Dielectric Property		AC2000V,1min
Environment	Altitude	≤1000m
	Temperature	-25℃ ～ +40℃
	Humidity	≤95%
	Pollution Degree	2

hot tags :

previous :
Electromagnet

categories

Hot Products

Short Circuit and Earth Fault Detector

EKL4B Short Circuit and Earth Fault Detector indicates high voltage power line short circuit fault by detecting the 3 single-phase line-currents and short circuit currents, and the grounding fault by detecting the zero sequence currents. With visual or audible indicators, it helps line patrol staff to fast find out the location where there is a short circuit or grounding fault on the 3kV-40.5kV power distribution networks, switchgears or cable branching units etc.
High Voltage Indicator

DXN3-T High Voltage Indicator indicates the voltage status of the main circuit of the high voltage electrical equipments, preventing electrical misoperation and accidental entry into the area with high voltage presence.
Instrument Transformer

LMZK3 split core instrument transformer is suitable for measurement of primary current, or for protection of electrical equipments such as microcomputer in 10KV and 35KV AC power distribution networks. It is widely used in fully insulated ring network switchgears such as ABB-Safe Ring/Safe Plus...and cable distribution boxes. The transformer can be directly installed at the inlet and outlet of the GIS or AIS cables. The semicircular ring core and secondary windings are vacuum poured by insulated resin. This CT is also used for signal acquisition for RTU or FTU.
Motor Drive Operating Mechanism

AD DC 3 – S / AC220 series of Motor Drive Operating Mechanism are applicable for modules of ABB safe cabinets. Operated by motor gear, it can store energy to make-and-break the circuit breakers of MV switchgears. Functions include Remote/local switching and local make-and-break of switches, local and remote indication of the status of load switches, earth switches and fuses.
Switchgear Temperature Controller

KST series of small-sized temperature controller and bimetallic thermostat dedicated for switchgears 10℃. It can automatically start fans or heaters and adjust temperature and humidity of the surrounding according to on-site situation. The contacts will output action indication signals, when ambient temperature is higher than pre- set temperature, the contact of controller will flip so to protect the equipments from being damaged.
Fuse Cover for Switchgear

Fuse cover is used in gas-insulated medium- voltage equipments in 12/24KV SF6 smart switch cabinet and ring main units.

Send a message

Contact Us

Xiamen Andaxing Electric Group Co.,Ltd TEL：86-592-3102888 or 3170079 FAX：86-592-3170008 Email : ade@cnade.net ADD：58th, Siming Park, Tong’an Industrial Zone, Xiamen, China. Zip Code : 361100 Websites : www.andaxingelectric.com www.andaxing.net www.cnade.net

related products

Electromagnet

MQZ3 electromagnet is mainly used in the control circuit of DC 220V, as the electromagnet coil for switching of motorized operating device of vacuum circuit breaker and switchgear incoming/outgoing cables.

Electromagnet Coil

MQZ4 D.C. electromagnet coil is used for the control circuit of D.C. 220V, which is dedicated for the hydraumatic solenoid valve of hydraumatic disc spring stored energy operating devices. The coil is thermo-plastic coated with superior temperature tolerance.

Electromagnet in Circuit Breakers

MQZ2 electromagnet in circuit breakers is mainly used in the control circuit of DC 220V, as the electromagnet coil for switching of motorized operating device of vacuum circuit breaker and switchgear incoming/outgoing cables.

Electromagnet in Disconnectors

MQZ5 electromagnet is mainly used in the control circuit of DC 220V, as the electromagnet coil for switching of motorized operating device of vacuum circuit breaker and switchgear incoming/outgoing cables.

switchgear electromagnet

MQZ6 switchgear electromagnet is mainly used in the control circuit of DC 220V, as the electromagnet coil for switching of motorized operating device of vacuum circuit breaker and switchgear incoming/outgoing cables.

Switchgear Electromagnet Coil

MQZ7 D.C. switchgear electromagnet coil is used for the control circuit of D.C. 220V, which is dedicated for the solenoid valve of pneumatic operating mechanism of vacuum circuit breaker. The coil is thermo-plastic coated with superior temperature tolerance up to class H.

Switchgear Electromagnet Coil

MQZ8 switchgear solenoid is used for the control circuit of D.C. 220V, which is dedicated for the solenoid valve of pneumatic operating mechanism of high voltage disconnector. The coil is thermo-plastic coated with superior temperature tolerance up to class H.

Switchgear Electromagnet Coil

get in touch